Xerox VersaLink C605 User Manual page 221

Environmental Benefits of Duplex Printing
Most Xerox products have duplex printing, also known as 2-sided printing, capability.
This enables you to print on both sides of the paper automatically, and therefore helps
to reduce the use of valuable resources by reducing your paper consumption. The Lot 4
Imaging Equipment agreement requires that on models greater than or equal to 40
ppm color or greater than or equal to 45 ppm monochrome the duplex function has
been auto enabled, during the setup and driver installation. Some Xerox models below
these speed bands may also be enabled with 2-sided printing settings defaulted on at
the time of install. Continuing to use the duplex function will reduce the environmental
impact of your work. However, should you require simplex/1-sided printing, you may
change the print settings in the print driver.
Paper Types
This product can be used to print on both recycled and virgin paper, approved to an
environmental stewardship scheme, which complies with EN12281 or a similar quality
standard. Lighter weight paper (60 g/m²), which contains less raw material and thus
save resources per print, may be used in certain applications. We encourage you to check
if this is suitable for your printing needs.
ENERGY STAR
The ENERGY STARprogram is a voluntary scheme to promote the development and
purchase of energy efficient models, which help to reduce environmental impact.
Details on the ENERGY STAR program and models qualified to ENERGY STAR can be
found at the following website:
The ENERGY STAR and ENERGY STAR mark are registered United States trademarks.
The ENERGY STARImaging Equipment Program is a team effort between United
States, European Union, and Japanese governments and the office equipment industry
to promote energy-efficient copiers, printers, fax, multifunction printers, personal
computers, and monitors. Reducing product energy consumption helps combat smog,
acid rain, and long-term changes to the climate by decreasing the emissions that
result from generating electricity.
For additional information on energy or other related topics, go to
www.xerox.com/about-xerox/environment/enus.html
www.xerox.co.uk/about-xerox/environment/engb.html.
Power Consumption and Activation Time
The amount of electricity that a product consumes depends on the way the device is
used. This product is designed and configured to enable you to reduce your electricity
usage.
After the last print, the device switches to Ready mode. In this mode, the device can
print again immediately. If the product is not used for a period of time, the device
switches to a Power Saver mode. In these modes, to enable reduced product power
consumption, only essential functions remain active. The product takes slightly longer
to produce the first print after it exits Power Saver mode than it takes in Ready mode.
This delay is the result of the system waking up from Power Saver mode and is typical
of most imaging products on the market.
® ®
Xerox VersaLink C605 Multifunction Printer
User Guide
www.energystar.gov
or
Regulatory Information
B-3