Omron K35-2 Manual page 9

Weighing Indicator
K3HB-V
An Ideal Indicator for OK/NG Judgements in
Automated and Picking Machines, Measuring
Factors such as Pressure, Load, Torque, and
Weight Using Load Cell Signal Input.
• Easy recognition of judgement results using color display that can be
switched between red and green.
• Equipped with a position meter for monitoring operating status trends.
• External event input allows use in various measurement and discrimina-
tion applications.
• Series expanded to include DeviceNet models.
• Short body with depth of only 95 mm (from behind the front panel), or
97 mm for DeviceNet models.
• UL certification approval (Certification Mark License).
• CE Marking conformance by third party assessment body.
• Water-resistant enclosure conforms to NEMA 4X (equivalent to IP66).
• Capable of high-speed sampling at 50 times per second (20 ms)
• Easy-to-set two-point scaling allows conversion and display of any user-
set values.
Refer to Precautions on page 30.
Model Number Structure
■ Model Number Legend
Base Units and Optional Boards can be ordered individually or as sets.
Base Units
K3HB-V@
1 5
1. Input Sensor Codes
LC: Load cell input (DC low-voltage input)
5. Supply Voltage
100-240 VAC: 100 to 240 VAC
24 VAC/VDC: 24 VAC/VDC
Optional Board
Sensor Power Supply/Output Boards
K33-@
2
Relay/Transistor Output Boards
K34-@
3
Event Input Boards
K35-@
4
Note: 1. CPB can be combined with relay outputs only.
2. Only one of the following can be used by each Digital Indicator:
RS-232C/RS-485 communications, a linear output, or DeviceNet communications.
Accessories (Sold Separately)
K32-DICN: Special Cable (for event inputs, with 8-pin connector)
K32-BCD: Special BCD Output Cable
8
Weighing Indicator
K3HB-V
Base Units with Optional Boards
K3HB-V@-@@@
1 2 3 4 5
2. Sensor Power Supply/Output Type Codes
None: None
CPB: Relay output (PASS: SPDT) + Sensor power supply
(10 VDC +/ − 5%, 100 mA) (See note 1.)
L1B: Linear current output (DC0(4) − 20 mA) + Sensor power supply
(10 VDC +/ − 5%, 100 mA) (See note 2.)
L2B: Linear voltage output (DC0(1) − 5 V, 0 to 10 V) + Sensor power supply
(10 VDC +/ − 5%, 100 mA) (See note 2.)
B: Sensor power supply (10 VDC +/ − 5%, 100 mA)
FLK1B: Communications (RS-232C) + Sensor power supply
(10 VDC +/ − 5%, 100 mA) (See note 2.)
FLK3B: Communications (RS-485) + Sensor power supply
(10 VDC +/ − 5%, 100 mA) (See note 2.)
3. Relay/Transistor Output Type Codes
None: None
C1: Relay contact (H/L: SPDT each)
C2: Relay contact (HH/H/LL/L: SPST-NO each)
T1: Transistor (NPN open collector: HH/H/PASS/L/LL)
T2: Transistor (PNP open collector: HH/H/PASS/L/LL)
BCD: BCD output + transistor output (NPN open collector: HH/H/PASS/L/
LL)
DRT: DeviceNet (See note 2.)
4. Event input Type Codes
None: None
1: 5 points (M3 terminal blocks) NPN open collector
2: 8 points (10-pin MIL connector) NPN open collector
3: 5 points (M3 terminal blocks) PNP open collector
4: 8 points (10-pin MIL connector) PNP open collector