Interface - Epson EB-G7905UNL User Manual

Part Names and Functions

Interface

Name
A
For analog RGB signals from a computer and component
BNC port
video signals from other video sources.
B
Computer port For analog RGB signals from a computer and component
video signals from other video sources.
C
Inputs audio from equipment connected to the HDMI
Audio3 port
port or the DVI-D port.
D
Inputs audio from equipment connected to the Computer
Audio1 port
port.
E
Outputs to an external monitor the analog signal from the
Monitor Out port
computer connected to the Computer port or the BNC
port. You cannot output signals input from other ports or
component video signals.
F
Audio Out port Outputs audio from the currently projected image to an
external speaker.
G
Inputs audio from equipment connected to the BNC port.
Audio2 port
H
Cable holder Run a commercially available cable tie to secure cables.
Function
Name
I
RS-232C port When controlling the projector from a computer, connect
it to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
s "ESC/VP21 Commands"
J
Remote port Connects the optional remote control cable set and inputs
signals from the remote control. When the remote control
cable is plugged into the Remote port, the remote receiver
on the projector is disabled.
s "Optional Accessories"
K
Service port This port is used by maintenance personnel to control the
projector. This should not normally be used.
L
Inputs video signals from HDMI compatible video
HDMI port
equipment and computers.
M
DVI-D port Inputs the computer DVI-D signals.
N
Connects a LAN cable to the optional HDBaseT
HDBaseT port
Transmitter.
s "Connecting an HDBaseT Transmitter"
s "Optional Accessories"
O
Connects a LAN cable to connect to a network.
LAN port
16
Function
p.208
p.215
p.51
p.215