Table of Contents
Advertisement
Part Names and Functions
Name
• Press to adjust focus, distortion, zoom, and lens shift.
K
[
][
][ ][ ]
s "Adjusting the Position of the Projected Image
buttons
(Lens Shift)"
s "Adjusting the Image Size"
s "Correcting the Focus"
• When the Configuration menu or the Help screen is
displayed, pressing these buttons selects menu items
and setting values.
s "Using the Configuration Menu"
• When using the optional wireless mouse receiver,
pressing these buttons moves the pointer.
s "Optional Accessories"
• When the Configuration menu or the Help screen is
L
[
] button
displayed, it accepts and enters the current selection and
moves to the next level.
s "Using the Configuration Menu"
• Acts as a mouse's left button when using the optional
wireless mouse receiver.
s "Optional Accessories"
M
Turns the video and audio on or off.
[A/V Mute] button
s "Hiding the Image and Sound Temporarily (A/V
Mute)"
• Press to change the test pattern while a test pattern is
N
[Page] buttons
displayed.
[[][]]
• Moves to the previous or next image file when
projecting images from a computer connected via a
network.
• When using the optional wireless mouse receiver, you
can change the PowerPoint file page during projection
by pressing the page up/page down buttons.
O
[a] Decreases the volume.
[Volume] buttons
[a][b]
[b] Increases the volume.
s "Adjusting the Volume"
Function
p.33
p.36
p.37
p.132
p.215
p.132
p.215
p.117
p.61
Name
P
Displays the Info menu from the Configuration menu.
[ ] button
s "Info Menu (Display Only)"
Q
[User1] button
Select any frequently used item from the Configuration
menu items, and assign it to any of these buttons. By
[User2] button
pressing the button, the assigned menu item selection/
[User3] button
adjustment screen is displayed, allowing you to make one-
touch settings/adjustments.
s "Settings Menu"
• Enter the Password.
R
Numeric buttons
s "Setting Password Protection"
• Use this button to enter numbers in Network settings
from the Configuration menu.
S
Hold down this button and press the numeric buttons to
[ID] button
select the ID for the projector you want to operate using
the remote control.
s "ID Settings"
T
Use this switch to enable (On)/disable (Off) ID settings for
[ID] switch
the remote control.
s "ID Settings"
U
Remote port
Connects the optional remote control cable set and
outputs signals from the remote control.
s "Optional Accessories"
When the remote control cable is plugged into this remote
port, the remote control light-emitting is disabled.
V
Displays and closes the Home screen.
[
] button
s "Home screen"
W
Hold down this button and press the numeric buttons to
[Num] button
enter passwords and numbers.
s "Setting Password Protection"
X
[Geometry] button
Corrects distortion in the projected image.
s "Correcting Distortion in the Projected Image"
p.62
20
Function
p.152
p.138
p.126
p.41
p.41
p.215
p.57
p.126
Advertisement
Table of Contents
