Table of Contents
Advertisement
Reading the Status Information
Explanations of the Display Content
Category
Status Information
System
Item
Status Display
Displays the projector's status. See the following for more information on how to remedy the errors and warnings.
s "Reading the Indicators"
OK
Warm-Up
Standby
Cool Down
Temp Error
Fan Error
Sensor Error
Lamp Error
Lamp Failure
Power Error
Internal Error
Auto Iris Error
Airflow Error
Temp Warning
Internal Warning
Airflow Decline
Lamp Warning
Power Warning
Direction Warning
Lamp Replacement
Clean Filter
p.164
The projector is in normal status.
The projector is warming up.
The projector is in standby status.
The projector is in cool down status.
A high temp error has occurred.
A fan error has occurred.
A sensor error has occurred.
A lamp error has occurred.
A lamp failure has occurred.
A power error (Ballast) has occurred.
An internal error has occurred.
An auto iris error has occurred.
A filter airflow error has occurred.
A high temp warning has occurred.
A warning about the internal system has occurred.
A low air flow error has occurred.
A lamp warning has occurred. Perform the same remedies as when the lamp error has
occurred.
A power warning (Ballast) has occurred.
The usage angle is out of range. Set it at the correct angle.
A lamp replacement recommendation has occurred.
An air filter notice has occurred.
Explanation
171
Advertisement
Table of Contents
