Epson EB-G7905UNL User Manual page 139

List of Functions
Submenu
Geometric Cor- You can correct distortion.
rection
s "Correcting Distortion in the Projected Image"
• Off:
Temporarily cancels the geometric correction.
• H/V-Keystone:
Adjust V-Keystone, V-Balance, H-Keystone, and H-
Balance to correct vertical and horizontal keystone
distortion.
• Quick Corner:
Select and correct the four corners of the projected image.
• Curved Surface:
Corrects distortion that occurs when projecting on a
curved surface.
• Corner Wall:
Corrects distortion that occurs when projecting on a
surface with right angles.
• Point Correction:
Divides the projected image into a grid and corrects the
distortion by moving the selected point of intersection
from side to side and up and down.
• Memory:
You can save the adjustment value of the geometric
correction and load it when needed.
s "Memory Function"
You can split the screen into two screens.
Split Screen
s "Projecting Two Images Simultaneously (Split Screen) "
p.114
You can adjust the volume. Setting values are saved for each
Volume
source.
Function
p.62
p.121
Submenu
Lock Setting Control Panel Lock: You can use this to restrict operation
of the projector's control panel.
s "Control Panel Lock"
Lens Lock: When set to On, [Lens Shift], [Zoom],
and [Focus] button operations on the remote control are
disabled.
s "Lens Lock"
Power Con- When set to ECO, the power consumption during
sumption *1 *2 projection drops and the fan noise is reduced.
You can limit the reception of the operation signal from the
Remote Receiv-
remote control.
er
When set to Off, you cannot perform any operations from
the remote control. If you want to make operations from
the remote control, hold down the [Menu] button on the
remote control for at least 15 seconds to reset the setting to
its default value.
Select the items in the Configuration menu that you want to
User Button
assign to the [User1], [User2], and [User3] buttons on the
remote control. The following items can be assigned.
Power Consumption
Image Processing, On-Screen Display, Display the QR
Code, Image Enhancement, Frame Interpolation
You can display a test pattern to adjust the projection
Test Pattern
without connecting other equipment when you set up the
projector.
s "Displaying a Test Pattern"
Perform operations and make settings for the memory
Memory
function.
s "Memory Function"
Function
p.128
p.129
*1 , Multi-Projection, Resolution,
p.32
p.121
139