Table of Contents
Advertisement
Adjusting Projected Images
a
Adjust by projecting a still picture. Gamma cannot be adjusted
correctly by using movies.
Select and adjust the correction value
a
Press the [Menu] button while projecting.
b
Select Advanced from Image, and then press the [
c
Select Gamma, and then press the [
d
Use the [
][
] buttons to select the correction value, and then
use the [
] button to confirm the selection.
] button.
Adjust while viewing the image
] button.
When a larger value is selected, the dark areas of images become brighter,
but the color saturation for lighter areas may become weaker.
When a smaller value is selected, you can reduce the overall brightness of
the image to make the image sharper.
If you select DICOM SIM from Color Mode on the Image menu, select the
adjustment value according to the projection size.
• If the projection size is 120 inches or less, select a small value.
• If the projection size is 120 inches or more, select a large value.
a
Medical images may not be reproduced correctly according to your
installation environment and screen specifications.
Select a point on the image where you want to adjust the brightness, and
adjust only the selected tone.
a
Press the [Menu] button while projecting.
b
Select Advanced from Image, and then press the [
92
] button.
Advertisement
Table of Contents
