Table of Contents
Advertisement
List of Functions
Submenu
HDBaseT
Control Communications: (This cannot be set when
Extron XTP is set to On.) When set to On, Ethernet
communication, serial communication, and the wired
remote control through the HDBaseT Transmitter connected
to the HDBaseT port are all enabled.
Extron XTP: Set to On when you connect the Extron XTP
transmitter or switcher to the HDBaseT port. See the
following Extron Web site for more details on the XTP
system.
http://www.extron.com/
a
Function
• When Control Communications or Ex‐
tron XTP is set to On, Standby Mode is
automatically set to Communication On.
• When Control Communications or Ex‐
tron XTP is On, the projector's LAN
port, RS-232 port, and Remote port are
disabled.
• When Extron XTP is set to On, the fan
may rotate in standby mode but this is
not abnormal.
Submenu
Multi-Projection
Make settings when projecting from multiple projectors.
s "Multi-Projection Function"
Projector ID: Set the ID from 1 to 30. Off indicates that no
ID is set.
s "ID Settings"
Tiling: Set the number of split screens and positions of each
projected image.
s "Tiling"
p.110
Geometric Correction: Corrects distortion in the projected
image.
s "Correcting Distortion in the Projected Image"
Edge Blending: Corrects a border between multiple images
to create a seamless screen.
s "Edge Blending"
Scale: When using multiple projectors to project one image,
adjust the range of the image displayed by each projector.
s "Displaying a Scaled Image"
Color Mode: Set to Multi-Projection.
Brightness Level
differs, set the lamp brightness level. This item can be
adjusted only when Power Consumption is set to Normal
from the Settings menu.
s "Correcting the Brightness (EB-G7900U/EB-G7200W/
EB-G7000W/EB-G7800 only)"
Color Matching: Corrects the difference between the tint
and brightness of each projected image.
s "Color Matching"
Color Uniformity: Adjusts the color tone balance for the
whole screen.
s "Color Uniformity"
RGBCMY: You can adjust the Hue, Saturation, and
Brightness for R (red), G (Green), B (Blue), C (Cyan), M
(Magenta), and Y (Yellow) color components.
s "Adjusting RGBCMY"
Function
p.101
p.41
p.62
p.101
p.111
*1
: When the brightness of each lamp
p.104
p.105
p.198
p.106
144
Advertisement
Table of Contents
