Displaying Internal Test Pattern; Using The Status Function - Panasonic PT-RQ13KU Operating Instructions (Functional Manual)

Chapter 3 Basic Operations — Operating with the remote control

Displaying internal test pattern

The projector has eight types of internal test patterns to check the condition of the projector body. To display test
patterns, perform the following steps.
button
1) Press the <TEST PATTERN> button.
2) Press qw to select the test pattern.
Note
f Setting is also available from the [TEST PATTERN] (x page 162) menu.
f Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing
various adjustments.

Using the status function

Display the status of the projector.
button
1) Press the <STATUS> button.
f The [STATUS] screen is displayed.
Note
f This can be displayed from the [PROJECTOR SETUP] menu → [STATUS] (x page 156).
STATUS
PROJECTOR TYPE
RQ13K(123456789012)
PROJECTOR RUNTIME
10000h
LIGHT RUNTIME
10000h / 10000h
MAIN/SUB VERSION
1.00 / 1.00
INTAKE AIR TEMP.
31°C/87°F
OPTICS MODULE TEMP.
27°C/80°F
EXHAUST AIR TEMP. 31°C/87°F
AROUND LIGHT1 TEMP. 31°C/87°F
AROUND LIGHT2 TEMP. 31°C/87°F
COOLING CONDITION AUTO - FLOOR
ATMOSPHERIC PRESSURE
1013hPa
SELF TEST NO ERRORS
SEND E-MAIL
ENTER
CHANGE EXIT
MENU
1/4
ENGLISH - 77