Connection Example When Multiple Projected Images Are To Be Synchronized - Panasonic PT-RQ13KU Operating Instructions (Functional Manual)

f The maximum transmission distance between the twisted-pair-cable transmitter and the projector is 100 m (328'1") for the signal with
resolution of 1 920 x 1 200 dots or less. It is possible to transmit up to 150 m (492'2") if the twisted-pair-cable transmitter supports the
long-reach communication method. However, the signal that the projector can receive is only up to 1080/60p (1 920 x 1 080 dots, dot clock
frequency 148.5 MHz) for the long-reach communication method. For the signal with the resolution exceeding 1 920 x 1 200 dots, the
maximum transmission distance will be 50 m (164'1"). If these distances are exceeded, image may be disrupted or a malfunction may occur
in LAN communication. Please note that Panasonic does not support the use of the projector outside the maximum transmission distance.
When connecting with the long reach, video signal or distance that can be transmitted may be restricted, depending on the specification of
the twisted-pair-cable transmitter.
f For twisted-pair-cable transmitters of other manufacturers of which the operation has been verified with the projector, visit the Panasonic
website (https://panasonic.net/cns/projector/). Note that the verification for devices of other manufacturers has been made for the items set
by Panasonic Corporation, and not all the operations have been verified. For operation or performance problems caused by the devices of
other manufacturers, contact the respective manufacturers.

Connection example when multiple projected images are to be synchronized

Frames of the projected images can be synchronized by linking multiple projectors using the <FRAME SYNC 1
IN/OUT> terminal and the <FRAME SYNC 2 OUT> terminal. A combined screen with a balanced contrast can
be displayed by sharing the brightness level of the video signal input to each projector when structuring a multi-
display screen by combining the projected images from multiple projectors.
The connection method differs depending on the purpose, and menu setting will also be required. For the usage
of the <FRAME SYNC 1 IN/OUT> terminal and the <FRAME SYNC 2 OUT> terminal, go to the [DISPLAY
OPTION] menu → [FRAME SYNC SETTING] and set [FRAME SYNC] and [CONTRAST SYNC].
When the frames are synchronized and the contrast is not balanced
Set [FRAME SYNC] of the one projector that is to be the synchronization source to [MASTER]. Set [FRAME
SYNC] of the other projectors that are to be the synchronization target to [SLAVE].
Set [CONTRAST SYNC] to [OFF] on all projectors.
Connecting terminals of the synchronization source
Connecting terminals of the synchronization target
Chapter 2 Getting Started — Connecting
Connecting terminals of the synchronization target
Connecting terminals of the synchronization target
ENGLISH - 55