Parts For Installation (Optional); Projected Image And Throw Distance - Panasonic PT-RQ13KU Operating Instructions (Functional Manual)

Parts for installation (optional)

The projector can be installed on the ceiling by combining the optional Ceiling Mount Bracket (Model No.:
ET-PKD520H (for High Ceilings), ET-PKD520S (for Low Ceilings)) and Ceiling Mount Bracket (Model No.:
ET-PKD520B (Projector Mount Bracket)).
f Be sure to use the Ceiling Mount Bracket specified for this projector.
f Refer to the Installation Instructions of the Ceiling Mount Bracket when installing and setting up the projector.
Two projectors can be stacked and used simultaneously by using the optional Frame (Model No.: ET-PFD510).
Attention
f To ensure projector performance and security, installation of the Ceiling Mount Bracket must be carried out by your dealer or a qualified
technician.

Projected image and throw distance

Install the projector referring to the projected image size and projection distance. Image size and image position
can be adjusted in accordance with the screen size and screen position. When the Fixed-focus Lens (Model No.:
ET-D75LE90) is attached, the projection relation between the screen and the projector differs from that of other
lenses. Refer to "For the Fixed-focus Lens (Model No.: ET-D75LE90)" (x page 40) for details.
L (LW/LT)
*1
L1
SH
SW
SD
*1 LW: Minimum projection distance when the Zoom Lens is used
LT: Maximum projection distance when the Zoom Lens is used
Projection lens Model No.
ET-D75LE6
ET-D75LE8
ET-D75LE10
ET-D75LE20
ET-D75LE30
ET-D75LE40
ET-D75LE50
Chapter 2 Getting Started — Setting up
Projected image
SW
Projection distance
Lens protrusion dimension
Projected image height
Projected image width
Projected image size
Screen
L (LW/LT)
L (LW/LT)
Screen
Dimension for L1 (approximate value)
0.212
0.254
0.125
0.121
0.121
0.124
0.203
L1
L1
(Unit: m)
(Unit: m)
ENGLISH - 39