Acer Altos G520 Service Manual page 41

Hide thumbs Also See for Altos G520:
Table of Contents

Advertisement

Parameter
Onboard P-ATA Channels
Onboard S-ATA Channels
Configure S-ATA as RAID
S-ATA Ports Definition
Mixed P-ATA /S-ATA
Primary/Secondary/Third/Fouth
IDE Master
Primary/Secondary IDE Slave
Hard Disk Write Protect
IDE Detect Time Out (Sec.)
ATA(PI) 80Pin Cable Detection
Chapter 2
Description
Controls state of integrated P-ATA controller
Controls state of integrated S-ATA controller
When enabled the S-ATA channels are reserved to be
used as RAID
Defines priority between S-ATA channels.
Default set the S-ATA Port 0 to 3
IDE Master channel & Port 1 to 4
IDE Master Channel
Otherwise set S-ATA Port 0 to 4
IDE Master Channel & Port 1 to 3
IDE Master Channel
Selects submenu for configuring mixed P-ATA and S-ATA. Lets you remove a P-ATA and
replace it by S-ATA in a given channel. Only 1 channel can be S-ATA.
While entering setup, BIOS auto detects the presence
of IDE devices. This displays the status of auto
detection of IDE device.
While entering setup, BIOS auto detects the presence
of IDE devices. This displays the status of auto
detection of IDE device.
Primary used to prevent
unauthorized writes to hard drives.
Primarily used with older IDE devices with longer spin
up times.
The 90pin cable is required for UDMA-66 and above.
BIOS detects the cable by querying the host and/or
device.
Option
Disabled: disables the
integrated P-ATA Controller
Primary : enables only the Primar
P-ATA Controller
Secondary : enables only the
Secondary P-ATA Controller
Both : enables both P-ATA
Controller
Disabled: disables the integrated
S-ATA Controller
Enabled : enables the integrated
S-ATA Controller
Disabled
Enabled
A1st-3rd M/ A2nd-4thM
A1st-4th M/ A2nd-3rdM
Selects submenu with additional
device details.
Selects submenu with additional
device details.
Disable/Enable device write protec-
tion. This will be
effective only if device is accessed
through BIOS.
Select the time out value for
detecting ATA/ATAPI device(s).
0,5,10,15,20,25,30,35
Select the mechanism for detecting
80 pin ATA(PI) cable.
Host & Device
Host
Device
33

Advertisement

Table of Contents
loading

Table of Contents