Table of Contents
Advertisement
Boot Settings Configuration
The Boot Settings Configuration submenu lets you specify the preferred settings for system bootup.
Parameter
Quick Boot
Quiet Boot
Bootup Num-Lock
PS/2 Mouse Support
POST Error Pause
Hit "F2" Message Display
Scan User Flash Area
42
Description
Allows BIOS to skip certain tests while
booting. This will decrease the time needed
to boot the system
Enables or disables the Quiet Boot function.
When set to Enabled, BIOS setup is in
graphical mode and displays only an identifi-
cation logo during POST and while booting.
After booting, the screen displays the oper-
ating system prompt (such as DOS) or logo
(such as Windows). If any error occurs
while booting, the system
automatically switches to text mode
Sets the power on state for Numlock.
Enable this parameter if you intend to use a
mouse or trackball with a PS/2 interface
When this item is enabled you will be
prompted when an error is detected during
boot up. If disabled, the system will boot with
no intervention, if possible
Displays "Press 'F2' to run Setup" during
POST
Allows BIOS to scan Flash ROM for user
binaries
Option
Disabled
Enabled
Disabled
Enabled
Off
On
Disabled
Enabled
Auto
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Chapter 2
Advertisement
Table of Contents
