Table of Contents
Advertisement
Removing the HDD and FDD Module
1.
Pull the cables from the cable click.
2.
Disconnect the SCSI cables from the rear of HDD.
3.
Disconnect the power cables from the rear of HDD.
4.
Remove the four thumb screws from HDD cage.
5.
Pull the HDD cage from the chassis.
6.
Remove the two screws on each side to detach the HDD unit.
7.
Then pull the HDD unit from the HDD cage.
8.
Press the latched locatd on both side to pull out the dummy HDD tray.
9.
Remove the four screws.
10. Detach the HDD unit from the dummy tray.
11. Disconnect the CD-ROM power cable and IDE cable.
12. Press the bracket on both side to pull the CD-ROM out from chassis.
Chapter 3
60
Advertisement
Table of Contents
