Table of Contents
Advertisement
4.7.2
Setup Password
The Setup Password prevents unauthorized access to the BIOS
utility.
Setting a Password
1.
Make sure that JP11 is set to
You cannot enter the BIOS utility if a Setup
password does not exist and JP11 is set to
(password check enabled).
1-2
By default, JP11 is set to
password).
2.
Enter BIOS utility and select System Security.
3.
Highlight the Setup Password parameter and press the
key. The password prompt appears:
4.
Type a password. The password may consist of up to seven
characters.
Be very careful when typing your password
because the characters do not appear on the
screen.
5.
Press
. A prompt asks you to retype the password to verify
your first entry.
4-32
(bypass password).
2-4
2-4
(bypass
AcerAltos 19000Pro4 System Guide
or
Advertisement
Table of Contents
