To Set An Administrator/User Password; To Remove The User Password - Acer Altos G520 series User Manual

To set an Administrator/User password

1 Use the up/down keys to highlight a password parameter
(Administrator Password or User Password) then press Enter.
A password box will appear.
2 Type a password then press Enter.
The password may consist of up to six alphanumeric characters
(A-Z, a-z, 0-9).
Retype the password to verify the first entry then press Enter
3
again.
After setting the password, the system automatically sets the
chosen password parameter to Installed.

To remove the User password

1 Use the up/down keys to highlight the Clear User Password
parameter then press Enter.
2 Enter the current Admin password then press Enter.
Press Enter twice without entering anything in the new and
3
confirm password fields.
After doing this, the system automatically sets the User password
parameter to Not Installed.
99