Table of Contents
Advertisement
BLUETOOTH OUTPUT (SEND)
Bluetooth output (or SEND) is different. This sends a Bluetooth signal out of the DMS-650 to a Bluetooth receiver, such as
Bluetooth speakers or headphones. Bluetooth Receive, as per the previous steps, is sending a Bluetooth signal to the DMS-
650 from a phone or tablet.
1.
Set your Bluetooth headphones or speakers to paring mode.
2.
Go to Menu>>Bluetooth Send in the DMS-650 menu. Switch to ON. DMS-650 will search for Bluetooth devices and
list them.
3.
Select the desired Bluetooth device and press Enter to connect.
4.
Initiate playback from any DMS-650 source as normal (excluding Bluetooth Input source) and sound will only
output to your connected Bluetooth speakers or headphones.
NOTE: Normal output of the analog RCA and XLR jacks will cease when Bluetooth send is enabled.
56
Advertisement
Table of Contents
