Firmware Update Menu - Cary Audio Design DMS-650 Owner's Manual

FIRMWARE UPDATE MENU

This displays the current firmware version and serial number as well as checks for new firmware via the System Update.
1. To check for new firmware, make sure DMS-650 is connected to your network, select System Update and press
Enter.
2. Select Check Now and press Enter. If new firmware is available, it will say so and ask if you wish to install it.
Otherwise, it will say you have the most current version. You can also check the Automatic Update Notification
box and the DMS will automatically notify you on the DMS-650 screen when an update is available.
NOTE: You MUST ALWAYS check for an app update to the Cary Audio Streamer 2.0 App each time there is a firmware
update. Conversely, if you notice there has been a Cary Audio Streamer 2.0 app update, check if there is also a firmware
update. If after doing a firmware update the DMS-650 or app are acting not as expected, you should do as mentioned
above and do a factory reset of the unit. Once the factory reset has completed, unplug the unit for 10 minutes and try
again. See Reset section of this manual for more.
27