Table of Contents
Advertisement
BLUETOOTH OUTPUT (SEND)
Bluetooth output (or SEND) is different. This sends a Bluetooth signal out of the DMS-700 to a Bluetooth receiver, such as a
Bluetooth speaker or headphone. Bluetooth Receive, as per the previous steps, is sending a Bluetooth signal to the DMS-
700 from a phone or tablet.
1. Set your Bluetooth headphones or speaker to paring mode.
2. Go to Menu>>Bluetooth Send in the DMS-700 menu. Switch to ON. DMS-700 will search for Bluetooth devices and
list them.
3. Select the desired Bluetooth device and press Enter to connect.
4. Initiate playback from any DMS-700 source as normal (excluding Bluetooth Input source) and sound will only
output to your connected Bluetooth speaker or headphone.
NOTE: Normal output of the analog RCA and XLR jacks will cease when Bluetooth send is enabled.
56
Advertisement
Table of Contents
