Wifi Setup Using Ir Remote Only - Cary Audio Design DMS-650 Owner's Manual

WIFI SETUP USING IR REMOTE ONLY

1. Place the DMS-650 anywhere within the routers Wi-Fi range. Make sure Wi-Fi antenna are connected. (Do NOT
connect the Ethernet cable).
2. Turn on the DMS-650. Once on, press the Network Input Source on the IR remote. The following prompt will
display. Select "Connect to Wi-Fi with IR Remote."
3. A prompt will appear confirming you wish to search and setup a Wi-Fi Connection. Select YES.
4. Select your Wi-Fi network and press Enter.
31