Bluetooth Send Setup And Operation; Bluetooth Send (Transmit) Function; Pairing Bluetooth Headphones Or Speakers To Aios - Cary Audio Design AiOS Owner's Manual

Lifestyle series all-in-one system

Hide thumbs Also See for AiOS:

Table of Contents

BLUETOOTH SEND SETUP AND OPERATION

How is Bluetooth SEND different from connecting my phone to AiOS like the section above details?

BLUETOOTH SEND is different because it allows you to send music FROM AiOS to your Bluetooth

enabled headphones or speakers (unlike sending music from your phone to AiOS). This is a very

unique feature for a product like AiOS and makes it very conducive to your music lifestyle by

eliminating the need for troublesome wires when listening to headphones. As we know, Bluetooth

headphone popularity has surpassed conventional wired headphones. Or, perhaps you just can't, or

prefer not to, have wires running to your main speakers. In this instance, using a pair of quality

Bluetooth speakers allows AiOS to create a wireless listening solution. Whichever your preference,

AiOS accommodates!

NOTE: When Bluetooth SEND function is on/enabled, it will automatically mute the sound to the

speakers you have connected/wired to AiOS. When Bluetooth SEND function is on/enabled AiOS

volume will be preset to level 45 allowing for a good balance of volume control up or down from

your Bluetooth headphones or speakers. When Bluetooth Send is turned off/disabled, music will

resume again to the wired speakers at the previous level you had it set to.

DID YOU KNOW?

It is possible to turn the wired speakers back on while Bluetooth Send is on/enabled within AiOS'

menu settings. However, this means the volume to the speakers will be at level 45, or the level

you've adjusted AiOS to while using BT Send. The result of doing this is that the sound level of

the wired speakers will be considerably higher than Bluetooth speaker(s). If enabling the wired

speakers when Bluetooth SEND is on, please take caution.

1. Press the Bluetooth Out on the IR remote .

2. To turn on or enable Bluetooth SEND, simply press Enter on the IR remote. A message will

appear on screen saying "INFORMATION; main speaker off". This is normal for the BT SEND

function.

Table of Contents