Table of Contents
Advertisement
5.
Navigate to your desired music selection and press Play. You can also press the Play All when available to play all
selections beneath it. Once playback is initiated, the Now Playing Screen will display as follows.
NOTE: You can also select Add or Delete from the IR remote to create a Queue or playlist. See Queue and Playlist
section of the manual.
RENDERER METHOD
Using the DMS-650 as a Renderer is somewhat different and it also requires server software to be installed on your
computer(s) as described above, and the use of the server/media players own app or a third party DLNA/UPnP app. The
advantage for some is that they may prefer to use a different app instead of the Cary Audio Streamer 2.0 app. For example,
one may prefer JRiver's JRemote or Gizmo, Bubble UPnP, Plug Player, 8Player, etc. The disadvantage is that the third-party
app can only play network audio and cannot access all features of the DMS-650, so a combination of a third-party app and
IR remote must be used. Renderer operation is very simple as outlined below.
1.
Turn on the DMS-650. It does NOT matter what inputs source the DMS-650 is set to.
2.
Open your preferred third party DLNA/UPnP app.
3.
Select "CARY DMS-650" from the available renderers within the third-party app and initiate playback in accordance
with the third-party app.
4.
The Now Playing screen will display your selection. All music selections and playback can only be controlled by the
third-party app.
Another way to push music to the DMS-650 in renderer mode is from a computer. To do so follow these steps:
1.
Turn on the DMS-650. It does NOT matter what inputs source the DMS-650 is set to.
2.
Turn on your computer (preferably Windows 7 or MAC OS X or later) and open your preferred media player
software.
3.
Right click on a music selection and Send to/Cast to Cary DMS-650 right from the computer. See example below.
Function may vary depending on media player software being used.
36
Advertisement
Table of Contents
