Service And Care; Care And Cleaning; Ac Power Fuse Replacement; Factory Service - Cary Audio Design DMS-650 Owner's Manual

Network audio player

Hide thumbs Also See for DMS-650:

Table of Contents

SERVICE AND CARE

The cabinet housing and front panel of the DMS-650 may be cleaned with a soft cloth and Windex or a window cleaner. The

frequency of cleaning will be governed by how many hours the DMS-650 is operated and by operating environment

cleanliness.

CAUTION: DO NOT LET ANY LIQUIDS SPILL INTO THE VENTS ON TOP OF THE UNIT.

The fuse is located inside the chassis and is not user serviceable. If the unit does not power up, contact an authorized

service representative. Never replace the fuse with any other value than a two (2) amp slow blow fuse 250V. The AC Power

Cord must be unplugged from the AC Power jack on the back of the unit prior to replacing the fuse. Set the unit Power

On/Off switch to the Off position and plug the AC Power cord back into the AC Power jack. Then set the Power On/Off

switch to the on position and verify proper operation. Contact Cary Audio for advice if the fuse repeatedly blows.

Careful consideration has been given to the design of your DMS-650 to keep maintenance problems to a minimum. Any

problems or requests for service should be referred to our Customer Service Department at 919-355-0010. DO NOT return

the DMS-650 to the factory without a Return Merchandise Authorization (RMA) number from our online Customer Service

Center (caryaudio.com/service-center/).

Cary Audio will assume no responsibility if the shipping company refuses to pay for damage due to your improper packing

or lack of insurance should the unit be lost or damaged in shipment. Please retain and always use the original shipping

carton for shipping the player. Also, Cary Audio reserves the right to return products sent in for service in a new box set at

the customer's expense if the original packing material was damaged in the initial shipment, or if it is deemed

unsatisfactory to use in return shipping.

Cary Audio will provide repair service for its products charging on a time and expense basis. Currently, the standard non-

warranty service bench fee is $140 for the first hour and $110 per hour thereafter. Parts used for repairs as well as return

shipping are additional. This may change and is not a quote for service. Please call us at 919-355-0010 for more information

about out-of-warranty service and repair fees.

CAUTION: NEVER REMOVE OR INSERT THE BACK -PANEL AC PLUG WHEN THE UNIT I SON OR THE AC CORD IS

PLUGGED INTO THE WALL.

Table of Contents