Table of Contents
Advertisement
NOTE: A) To get the most out of our fi™Bluetooth Implementation during playback, you can utilize our TruBit™ PCM and
DSD Upsampling for a superior listening experience from Bluetooth sources. B) If pairing information is deleted from your
device, you will need to perform pairing of that device again to connect.
BLUETOOTH OUTPUT (SEND)
Bluetooth output (or SEND) is different. This sends a Bluetooth signal out of the DMS-800PV to a Bluetooth receiver, such as
Bluetooth speakers or headphones. Bluetooth Receive, as per the previous steps, is sending a Bluetooth signal to the DMS-
800PV from a phone or tablet.
1.
Set your Bluetooth headphones or speakers to pairing mode.
2.
Go to Menu>>Bluetooth Send in the DMS-800PV menu. Switch to ON. DMS-800PV will search for Bluetooth
devices and list them.
3.
Select the desired Bluetooth device and press Enter to connect.
4.
Initiate playback from any DMS-800PV source as normal (excluding Bluetooth Input source), and sound will only
output to your connected Bluetooth speakers or headphones.
NOTE: Normal output of the analog RCA and XLR jacks will cease when Bluetooth send is enabled.
58
Advertisement
Table of Contents
