Table of Contents
Advertisement
While supporting the weight of the Monitor, carefully
5.
align the Mounting Hole on the Monitor Mount with the
Mounting Peg on the top Spring Arm.
Slide the Mounting Hole on the Monitor Mount over the
6.
Mounting Peg until it clicks into place.
Using the Hex Keys, adjust the swivel tension of the
7.
Monitor Mount by loosening or tightening the Hex Screws
located on the Monitor Mount next to the mount hole.
Repeat steps 1 - 7 to attach the second Monitor Mount.
8.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attaching the Monitor Mount
24
Advertisement
Table of Contents
Need help?
Do you have a question about the 8STWALLSTSI2 and is the answer not in the manual?