Attaching The Wrist Rest - StarTech.com 8STWALLSTSI2 User Manual

Wall-mounted sit-stand workstation, dual monitor mount, keyboard tray

Table of Contents

Insert the M4x8 mm Screws through the Mouse Tray Fixed

Plate and into the Mouse Tray.

Using a Phillips Head Screwdriver tighten the Mouse

Tray Fixed Plate Screws, be careful not to over-tighten the

screws.

(Optional) You can attach the EVA Mouse Pad onto the

Mouse Tray, by removing the backing from the EVA Mouse

Pad and affixing it to the surface of the Mouse Tray.

(Optional) You can hang the Mouse Holder off of the side of

the Mouse Tray.

Hanging the Mouse Holder off of the side of the Mouse Tray

Attaching the Wrist Rest

Remove the backing from the Wrist Rest and while applying

•

pressure, attach it to the bottom of the Keyboard Tray (in the

location your wrists wound normally rest while typing on a

keyboard).

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Table of Contents

Do you have a question about the 8STWALLSTSI2 and is the answer not in the manual?

Wallstsi2