Newland NLS-HR11 User Manual page 63

Sensitivity: This parameter specifies the degree of acuteness of the scanner's response to changes in
ambient illumination. The higher the sensitivity, the lower requirement in illumination change to trigger the
scanner. You can select an appropriate degree of sensitivity that fits the ambient environment.
High Sensitivity
Low Sensitivity
Sensitivity levels range from 0 to 255. The smaller the number, the higher the sensitivity.
Example: Set the sensitivity level to 10
1. Scan the Enter Setup barcode.
2. Scan the Custom Sensitivity barcode.
Scan the numeric barcodes "1" and "0". (See the Digit Barcodes section in Appendix)
3.
4. Scan the Save barcode. (See the Save/Cancel Barcodes section in Appendix)
5. Scan the Exit Setup barcode.
53
** Enter Setup
** Medium Sensitivity
Custom Sensitivity
Exit Setup