Check Digit Verification - Newland NLS-HR11 User Manual

** Enter Setup

Check Digit Verification

A check digit is optional for Standard 25 and can be added as the last digit. It is a calculated value used to
verify the integrity of the data.
Disable: The scanner transmits Standard 25 barcodes as is.
Do Not Transmit Check Digit After Verification: The scanner checks the integrity of all Standard 25
barcodes to verify that the data complies with the check digit algorithm. Barcodes passing the check will
be transmitted except the last digit, whereas those failing it will not be transmitted.
Transmit Check Digit After Verification: The scanner checks the integrity of all Standard 25 barcodes
to verify that the data complies with the check digit algorithm. Barcodes passing the check will be
transmitted, whereas those failing it will not be transmitted.
** Disable
Do Not Transmit Check Digit After Verification Transmit Check Digit After Verification
129 Exit Setup