Newland NLS-HR11 User Manual page 61

Image Stabilization Timeout: This parameter defines the amount of time that the scanner waits for the
image to stabilize to a point that it can be decoded with more accuracy. It is programmable in 0.1s
increments from 0.0s to 25.5s. The default timeout is 0.4s.
Example: Set the Image Stabilization Timeout to 5s
1. Scan the Enter Setup barcode.
2. Scan the Image Stabilization Timeout barcode.
Scan the numeric barcodes "5" and "0". (See the Digit Barcodes section in Appendix)
3.
4. Scan the Save barcode. (See the Save/Cancel Barcodes section in Appendix)
5. Scan the Exit Setup barcode.
51
Image Stabilization Timeout
** Enter Setup
Exit Setup