Advantech ADAM-6100PN Series User Manual page 52

Profinet i/o modules

Hide thumbs Also See for ADAM-6100PN Series:

Table of Contents

4.3.3.5

Individual Channel Configuration

You can see digital input value and configure setting for each digital input channel. It

is the same that you can control the digital output value and configure setting for

each digital output channel. Simply click the channel interested in the Individual

Channel Configuration items.

If you choose a digital input channel, the Status Display area should look similar to

Figure 5.14 below.

You can choose different mode for that digital input channel by choosing the DI mode

combo box at top of Status Display area. (You should choose the appropriate mode

depending on the hardware specification.) After you have chosen the mode, click the

Apply mode button. There are a total of five possible DI modes you can choose:

Figure 5.14 is the image when you choose DI mode. At the bottom of the Status Dis-

play area, you can see the digital input value by DI status LED display. If the digital

module you are using supports Invert DI Status function, there will be Invert signal

check box in the Setting area. You can click the check box to enable or disable that

function. Remember to click the Apply all button for all channels or Apply this but-

ton for this specific channel to complete the configuration. When you enable the

Invert DI Status function, the ADAM-6100 digital module will automatically inverse the

digital input value. For example, if the real external signal value is logic level low, then

the DI status LED display will be lit.

All ADAM-6100 digital modules support digital filter, so you can enable or disable the

filter by click the Enable digital filter check box. If you enable the filter, you can

define the minimum acceptable signal width by the Minimum low signal width and

Minimum high signal width text box. (Unit: ms) The high frequency noise will be

removed by this filter. Remember to click the Apply all button for all channels or

Apply this button for this specific channel to complete the configuration.

ADAM-6100PN Series User Manual

Figure 4.13 Individual Channel Configuration: DI

Table of Contents