Status Led Indicator - Advantech ADAM-6100EI Series User Manual

1.3.4

Status LED Indicator

There are 3 LED indicators on the front of the ADAM-6100 module-Status/COM, Link/
Speed 1, and Link/Speed 2. The Status/COM LED indicates the status of the module.
The Link/Speed LEDs indicate the network connections of Ethernet port 1 and port 2.
After power on, if the module is not connected to any network, the Status LED and
the COM LED will keep ON. Once the module is connected, the Status LED and
COM LED will work according to the table below.
Status of the module*
Mode
Init mode (Initial mode)
Normal mode (EtherNet/IP mode) Keep ON
Module Error
Port Communication
Mode
Port 1 connected
Port 2 connected
Status LED (Green)
ON/OFF flash
Keep OFF
Link LED (Green)
Link 1 will keep ON
Link 2 will keep ON
5 ADAM-6100EI Series User Manual
COM LED (Orange)
ON during communication
ON during Communication
ON/OFF flash
Speed LED (Orange)
Speed 1 ON when network
speed is 100M
Speed 2 ON when network
speed is 100M