Sirius Satellite Radio S-DDH1 Use And Maintenance Instruction page 62

Deactivating the control unit lock
• The cooktop must be turned on
• Press the sensor (B) for 1 second; after that, the unlocking is confirmed by a beep.
PAUSE FUNCTION
The execution of the function is only possible if at least one zone is on.
The pause condition may also be activated with cooking zone specific errors, here, the error
display is hidden. Also residual heat indication, special messages such as A, P or no pan are
hidden; the pause display has priority. If there is a general error during the pause, the control
switches off and terminates the mode.
Activating the Pause function
• Press the sensor (C) for at least 1 second, the corresponding LED turns on above the key and all
displays show the symbol "II".
While the Pause function is active:
• Any Timer (also Egg-timer) set before the pause will be stopped during the pause and continue when
pause mode is quitted.
• A selected booster or heat up time automatic function is terminated.
• Residual heat calculation and maximum operation time limitations will not be interrupted and keep
on working in the background.
• Functional LED's such as Timer, multi-zone, keep on glowing according to their status.
The pause mode can only be active for maximum 10 min. If the pause mode is not deactivated
within 10min the control switches off automatically.
Throughout the pause time the (A) button can be used to switch the control off. In this case the
pause mode is also deactivated.
Deactivating the pause mode:
• Press the (C) followed, the LEDs light up above the cursor of one of cooking zones.
• Within 10 seconds press and scroll from the left to the right on the cursor of the illuminated area.
The LED above the pause key turns off and the condition before the pause mode is restored.
RECALL FUNCTION
If the control was accidentally switched off through the main switch (A) all settings can be restored us-
ing the recall function. After switching the control off from the main switch the user has 6s to switch
the control on again and then he has another 6s to press the pause button (C) in order to recall the
settings. The recall function can only be used if at least one cooking zone was active (cooking level >0)
independent from key lock.
60
EN
NOTE
NOTE
A C
S-DDH1 S-DDH2