Sirius Satellite Radio S-DDH1 Use And Maintenance Instruction page 60

HOB CONTROL
• After turning the ceramic glass hob on all displays come on for a moment. The hob is ready for op-
eration.
• The hob is fitted with electronic sensors which are switched on if you touch the relevant circle for at
least one second.
• Each sensor activation is followed by a sound signal.
• Avoid placing any objects on sensor surface (possible error signalization
• Always keep the sensor surface clean.
ACTIVATING THE HOB
• Touch the (A) sensor for at least one second.
• The hob is activated and above the A button a LED turns on. (S-H1)
• The hob is now active, and all hotplate power indicators indicate »0«. (S-H2)
S-H1
F
S-H2
Now you need to select the next setting within 10 seconds, otherwise the hob switches off
again.
TURNING HOTPLATES ON
• If you have switched on the cooking hob by utilising the sensor (A), the required cooking zone can
be chosen within the next 10 seconds.
• Set the power level 1-9 by touching the slider (F).
• At the first touch, the level is set according to the part of the slider that you touch. Upon the slider,
the control LEDs light up, according to the level set. By sliding along the slider, the power level setting
is changed. By sliding to the right, the level increasing, while sliding to the left decreases the level.
When you move your finger away from the slider, the cooking field starts to operate at the level set.
6
F
If a specific point of slide control is pressed for at least 3 seconds, the automatic cooking is activated
(see Automatic fast heating).
Changing hotplate power settings
• By touching or sliding along the slide sensor (F) you change power setting.
• When you remove the finger from the slide sensor, the hotplate starts to operate at selected power.
58
F
0
F
NOTE
3
F
EN
F
0
F
6
F
).
F
0
F A
4
F
S-DDH1 S-DDH2
A
A