Sirius Satellite Radio S-DDH1 Use And Maintenance Instruction page 61

SWITCHING HOTPLATES OFF
• Selected hotplate must be activated.
• By touching the slide sensor (F) at the start, bring the power setting to "0". Short beep confirms the
OFF position.
SWITCHING THE HOB OFF
• The hob is switched off by pressing the main (A) sensor.
• The sound signal beeps and all indicators go off, except for those hotplates which are still hot and
display the warning "H" sign as an indication of the remaining heat.
• If you switch the hob off prior end of cooking session, use the remaining heat and save electric en-
ergy.
LOCKING THE CONTROL UNIT
By activating the key lock protection you can stop the operation of the appliance and the use of hotplates.
Activating the control unit lock
• The cooktop must be turned on.
Model S-H1
Simultaneously press "B and I" and immediately after again the button (B). All displays show the letter
"L". The block is active.
• The safety lock secures all sensors operated by mistake, except the sensor (A).
• If the hob is turned off when the lock function is activated, this function will remain in memory until the
hob is switched on again.
L
S-H1
Unlock the control:
• The hob must be switched on.
• Temporary Unlock: Simultaneously press "B and I". Now you can use the controls. When switched
on, the hob will be locked again.
• Permanent Unlock: Simultaneously press "B and I" and immediately after the button (I) again. When
switched on again, the block is off.
Model S-H2
• Press the sensor (B) for approximately 1 second, the corresponding LED turns on above the key, the
block is active.
• Safety lock prevents the activation of all sensors, except for (A) and (B) sensor.
• If the hob is switched off when the lock function is activated, it remains in memory until a new switch-
es the hob.
• When set timers end their time, alarms can be switched by activating (D) or (E) keys without need for
unlocking the control.
S-H2
S-DDH1 S-DDH2
L
6
EN
L
9
L
3
B A
- L -
B A I
59