HP 8924C Assembly page 292

Chapter 6, HP 8924E Performance Verification
CDMA Generator Duplex Out Amplitude Level Accuracy Performance Test 28
Procedure
292
1. Press the PRESET key on the Test Set.
2. Access the CONFIGURE screen, and change the RF Display field to Freq.
3. Set the (Gen)-(Anl) field to 0.
4. Set the Output Port to Dupl.
5. Access CDMA Call Control screen.
6. Set RF GEN Freq to 840 MHz.
7. Access the CDMA CELLULAR MOBILE TRANSMITTER TEST screen.
8. Set the Sector Power field to the values listed in the PTR for Sector Power.
"CDMA Generator Duplex Out Amplitude Level Accuracy Performance Test 28"
on page 400.
9. Set the Sector Power field to Off.
10. Change the Avg Power measurement field to Chan Power (Channel Power).
11. Calibrate the Channel Power by selecting Calibrate in the Power Meas field.
12. Access the CDMA GENERATOR CONTROL screen.
13. Set the AWGN Power (Average Power) field to the values listed in the PTR for AWGN
Power.
14. Access the CDMA CELLULAR MOBILE TRANSMITTER TEST screen and read
Chan Power and record it in the PTR.
N:\mkt\MANUALS\HP8924C\ALR\24e_pt.fb
See