HP 8924C Assembly page 204

Chapter 5, HP 8924C Performance Verification
RF Analyzer FM Bandwidth Performance Test 24
204
Make the following AM/FM test source setting:
• Test Mode: FM
Make the following measuring receiver settings:
• Reset the measuring receiver
• FM Mode
• Filters off
Make the following audio analyzer settings:
• Frequency: 1 kHz
• Impedance: 50 [ohm]
• Amplitude: 50 mV
OR
• Frequency: 1 kHz
• Impedance: 600 [ohm]
• Amplitude: 300 mV
These settings should result in a deviation reading of about 25 kHz on the
measuring receiver. Adjust the amplitude for 25 kHz deviation as read on the
measuring receiver.
N:\mkt\MANUALS\HP8924C\ALR\24c_pt.fb