HP 8924C Assembly page 172

Chapter 5, HP 8924C Performance Verification
AF Gen AC Level Accuracy Performance Test 10
172
Procedure
1. Select the RF GENERATOR screen.
2. Set the Output Port field to RF Out.
3. Set the AFGen1 To and AFGen2 To fields to Off.
Level (dBm)
RF (MHz)
RF GENERATOR
TX Frequency
TX Power
RF Gen Freq AFGen 1 Freq
Amplitude AF Gen1 To
Atten Hold
FM Coupling
Output Port
Select Dupl connector
4. Measure the RF Level at the frequencies and levels shown in the PTR and compare the
measured RF level to the limits shown in the PTR.
AC Level
AFGen2 Freq Mic Pre-Emp To Screen
AFGen2 To Mod In To
Audio Out
Select Off mode
N:\mkt\MANUALS\HP8924C\ALR\24c_pt.fb