I_Apci1710_Resetboardintroutine - Addi-Data APCI-1710 Technical Description

Standard software

12) i_APCI1710_ResetBoardIntRoutine (..)

Syntax:
<Return-Wert> = i_APCI1710_ResetBoardIntRoutine
Parameter:
- Input:
BYTE b_BoardHandle
- Output:
No output signal has occurred
Task:
Stops the interrupt administration of the xPCI-1710.
Deinstalls the interrupt routine if the interrupt administration of all xPCI-
1710 is stopped.
Calling convention:
ANSI C :
int
unsigned char
i_ReturnValue = i_APCI1710_ResetBoardIntRoutine
Return value:
0: No error
-1: Handle parameter of the board is wrong
-2: No interrupt installed with the function
"i_APCI1710_SetBoardIntRoutineXXX"
78
(BYTE b_BoardHandle)
Handle of the board
i_ReturnValue;
b_BoardHandle;
(b_BoardHandle);
APCI-1710