Registration Of A New Board; Changing The Registration Of An Existing Board - Addi-Data APCI-1710 Technical Description

Software

7.2.1 Registration of a new board

IMPORTANT!
i
For the registration of a new board you need administrator
right. Only an administrator is allowed to record a new board or
modify an already existing registration.
♦ Call up the ADDIREG program.
Figure 7-1 will be displayed. Click on "Insert" and then select the required
board.
♦ Click on "OK".
The Default address, Interrupt and the other parameters will be set
automatically. The parameters will be listed in the lower areas. If the
parameters are not set automatically by BIOS you can modify them. Click
on the required scroll function/functions and select a new value. Confirm it
with a click.
♦ When the required is set, click on "Set"-
♦ Save the configuration with "Save".
You can control if the registration is right be conducting a test.
If the test result is positive you can leave the ADDIREG program. Then the
board will be initialized with the set parameters and can be operated.
You will be requested to restart your PC. Otherwise, the parameters will be
saved in files so that there is no need to restart the PC.

7.2.2 Changing the registration of an existing board

IMPORTANT!
i
In order to register a new board, administrator rights are
required. Only an administrator is allowed to register a new
board or to change an already existing registration.
♦ Call the ADDIREG program. Mark the board whose parameters you
want to change.
The board's parameters (base address, DMA, channel etc) are listed in the
lower areas.
♦ Click on the parameters that you want to set newly and open the
scrolling function.
♦ Select a new value. Confirm it with a click. Please repeat this for each
parameter to be changed.
30
APCI-1710