Loading A Function Into A Function Module - Addi-Data APCI-1710 Technical Description

APCI-1710 Software
♦ When the required configuration is set, click on "Set".
♦ Save the configuration with "Save".
You can check if the register is correct by a test. If the test is positive you
can exit the ADDIREG program.
The board will be initialised with the set parameters and now can be
distributed.
7.3

Loading a function into a function module

The SET1710 configuration program is a 16-bit or 32-bit program for
Windows 3.11 and Windows XP/NT/2000/98. It will be installed
automatically when installing the driver in 32 bit (Windows
XP/NT/2000/98).
At delivery time all function modules are preset with the function
"incremental counter".
The functions are programmed once and separate for each function module
through "SET1710.exe", which is delivered with the board. After the PC's
new start the board APCI-1710 is operable.
The user also can set the configuration of the modules through the software
(see software function i_APCI1710_ConfigureAllModule in chapter 9).
31