Power Regulator; Ipmi Subsystem - ADLINK Technology AMC-7000 User Manual

3.2 Power Regulator

The Power Regulator is the part of the module that generates the
required power from the payload power (+12V) that is delivered to
the module through the AMC connector. This power is current lim-
ited by the onboard regulator.

3.3 IPMI Subsystem

The IPMI subsystem provides management control for the board.
It is based on an Atmel microcontroller (Module Management Con-
troller - MMC). Its function is to monitor module functions such as
power, temperature, and hot swap requests via the ejector handle
and report these to the base controller in the enclosure. It also
stores information about the module including serial number and
E-Keying.
10 Functional Description