Stopping The Engine - TOHATSU MFS 9.9E Owner's Manual

Hide thumbs Also See for MFS 9.9E:
Table of Contents

Advertisement

Reverse
1. Quickly pull the control lever to the
Reverse (R) position at 32°, where the
gear will be connected, while lifting up
on the lock button located under the
control lever grip.
2. Further rearward motion will open
the throttle.
Acceleration
Open control lever gradually.
N
1
1. Control lever
ENOM00049-A

5. Stopping the engine

ENOW00868-1
WARNING
Be careful not to remove engine stop switch
lanyard from engine accidentally while boat
is running. Sudden stop of engine can cause
loss of steering control, speed, possibly
leading the crew(s) and or objects on the
boat to be thrown forward due to inertial
force.
Tiller handle type
1. Turn the throttle grip to the slow
position.
1. Throttle grip
2. Put the shift lever in the Neutral posi-
tion.
Run the engine for 2-3 minutes at
idling speed for cooling down if it has
been running at full speed.
3. Turn the main switch key to the OFF
position or push the stop switch. (Do
ENOF00879-2
not forget to turn the key off).
Side mount RC type
1. Put the control lever in the Neutral
position and run the engine for 2-3
minutes at idling speed for cooling
down if it has been running at full
speed.
ENGINE OPERATION
1
ENOF01107-1
ENOF00314-B1
43
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfs 15eMfs 20e

Table of Contents