TOHATSU MFS 9.9E Owner's Manual page 39

3. Remove starter lock cable from recoil
starter by pulling the starter lock
cable.
4. Remove the bolts (3pcs) and remove
the recoil starter.
5. Insert the knotted end of the starter
rope into the notch in the flywheel
and wind the rope clockwise around
the flywheel several turns.
ENOF01251-0
6. Tie a loop in the another end of the
emergency starter rope and attach
socket wrench, Both the loop and the
wrench are provided in outboard
motor box.
ENOF00124-1
ENOW00860-0
Be sure to keep the harness away from the
rotation parts.
7. Be sure to install the stop switch lock
to the stop switch, and attach the
stop switch lanyard securely to the
operator or to the operator's PFD
ENOF00125-1
(Personal Flotation Device.)
8. Set the control lever in the Neutral
position.
ENGINE OPERATION
ENOF00126-1
ENOF01214-1
CAUTION
39
7