TOHATSU MFS 9.9E Owner's Manual page 34

34
ENGINE OPERATION
Do NOT use a primer bulb/hose assembly
that does not contain a Fuel Demand Valve or
a sealing mechanism as shown below: other-
wise fuel spillage may occur when the con-
nector is connected to the engine.
Do not connect fuel connector except when
operating engine. Fuel leakage is a fire or
explosion hazard, which can cause serious
injury or death.
ENOW00947-0
When using a separate tank, be sure that the
7
fuel line is not kinked and is connected
securely.
1. Fully open the air vent screw on the
fuel tank cap.
1
1. Air vent screw
2. Fuel tank cap
2. Open the fuel tank cap slowly and
release internal pressure completely.
After that, close the fuel tank cap.
3. Connect the fuel connector to the
engine and fuel tank.
ENOF00036-0
CAUTION
2
3 3
1. Fuel connector
2. Push
3. Insert
1
1. Pull
2. Insert
4. Squeeze primer bulb until it becomes
stiff to feed fuel to vapor separator.
Point the arrow mark upward when
priming.
1
2
1. Engine side
2. Fuel tank side
Do not squeeze primer bulb with engine
running or when the outboard motor is
tilted up to avoid fuel from overflowing.
1
2 2 2
ENOF00310-1
2
ENOF00861-A
ENOF00862-0