Write To Unit - FlowLine EchoWave LG11 Series Manual

Appendix
E. WRITE TO UNIT
After you have entered configurations,
selected and configured the Tank Shape and
entered the Tank Values, click "Write to Unit"
and load the configuration into the memory of
the sensor. When completed, this
configuration will remain inside the sensor
memory and will not change unless the sensor
is connected to WebCal
configuration is written to the sensor. Loss of
power will not change or lose the configuration
within sensor memory.
Next, use the file management features to save your configuration by clicking "Save Config File" and print
your wiring diagram by clicking "Wiring Diagram."
"Save Config File" will save this configuration as a text file which can be loaded back into WebCal
pressing the "Open Config File" button. It is good practice to save the configuration file for each different
configuration with a unique name for easy identification. If using multiple sensors in identical applications, then
use of a single configuration file is recommended.
"Wiring Diagram" will display a PDF file showing the unique wiring for the specific configuration created in
WebCal™. The PDF can be printed or emailed. It is good practice to save the wiring diagram as a backup
MN300840 REV A5
®
and a new
Section Seven

Write to Unit

Wiring diagram
Save Config File
®
by
.
39 |