Step 7 - Write To Unit - FlowLine EchoPod UG06 Series Quick Start Manual

STEP 7 - WRITE TO UNIT

®
This WebCal * operation uploads the configuration into the sensor, provides a custom wiring diagram specific
to the signal output and/or relay configuration, and saves the configuration file to your hard drive.
* For complete information on the WebCal
flowline.com/webcal-software.
Before configuration can be completed:

You must click the Write to Unit button to save the settings to the unit.

Then, click Wiring Diagram for a hard copy of the sensor's settings.

Finally, enter the file name under which you wish to save the configuration file and click Save Config
File.
Configuration is now complete.
®
Disconnect the USB
| 6
®
software, please refer to the WebCal
Fob before continuing to the next step: Mounting the EchoPod
®
manual located at
®
.
QS310140 Rev A2