Table of Contents
Advertisement
1.4.
Settings of the 8 Dip switches (black)
Some settings have to be selected by the dip-switches on the
video interface.
Dip position
down = ON
Dip
Function
1
Front camera
Power supply output
(red wire)
2
Video 1
3
Video 2
4
No function
5
Rear-view cam type
6
No function
7
Monitor selection
8
Monitor selection
*The front camera will automatically be switched for 10 seconds after disengaging the
reverse gear.
See the following chapters for detailed information.
After each Dip-switch-change a power-reset of the video interface has to be performed!
Version 14.09.2021
and position
up = OFF
ON (down)
enabled*
+12V (max. 3A) when
reverse gear is engaged incl.
10 seconds delay and +12V
by manual switching to
front camera by
enabled
enabled
after-market
set to ON
HW:CAM(V100)/(V20+V41)
OFF (up)
disabled
+12V (max. 3A) ACC
keypad*
disabled
disabled
set to OFF
factory or none
set to OFF
set to OFF
CI-RL4-IOR
Advertisement
Table of Contents
