Connection - 10Pin Pnp Cable - Car-Interface.com CI-RL4-IOR Manual

2.4. Connection – 10pin PNP cable
Connect the 10pin PNP cable's female 10pin connector to the 10pin connector of the
video interface.
Disconnect both female 28pin connectors of the factory harness at the rear side of the
head unit and connect it to the male grey coloured 28pin connectors of the 10pin PNP
cable.
Connect the 10pin PNP cable's opposite female grey coloured 28pin connectors both to
the head unit's previously become free male 28pin connectors.
Version 14.09.2021 HW:CAM(V100)/(V20+V41) CI-RL4-IOR