Arris Touchstone TG862G/NA User Manual page 35

4. Choose the TCP/IP tab, if necessary.
If you are using TCP/IPv4, go to step 5.
If your cable provider requires TCP/IPv6, go to step 8.
5. Choose
6. If necessary, click the
7. Close the System Properties application.
TCP/IPv4 configuration is completed.
8. If you are using TCP/IPv6, click
9. Choose
10. Close the System Properties application.
Release 8 STANDARD 1.5 August 2016
© 2011-2016 ARRIS Enterprises LLC. All Rights Reserved.
Using DHCP from the Configure IPv4 menu.
Renew DHCP Lease
Automatically from the Configure IPv6 drop-down menu and click OK.
Chapter 6: Configuring Your Ethernet Connection
button.
Configure IPv6 near the bottom of the previous window.
Touchstone TG862G Telephony Gateway User Guide
35