ATEN Altusen KH1516A User Manual page 21

No. Component
1 power socket
2 power switch
3 daisy chain
ports
4 grounding
terminal
5 console ports
6 KVM port
section
The power cord to the AC source plugs in here.
This is a standard rocker switch that powers the KH1508A /
KH1516A / KH1532A on and off.
When daisy chaining units (see Daisy Chaining, page 18),
the daisy chain cables plug in here. The port on the left is the
chain in port and the port on the right is the chain out port.
The wire used to ground the unit connects here.
If this is a single station installation, or if this is the first station
of a daisy chained installation, the keyboard, monitor, and
mouse that make up the local console plug in here. You can
use any combination of PS/2 and USB keyboards and mice
for the console.
The Cat 5e/6 cables that link to the KVM adapter cables
(which link to the computers) plug in here.
Chapter 1. Introduction
Description
9